 Obtain a cable adapter that allows you to get easy access to the 9 individual pins of your serial port, like the one on the left. I could only find one for 25-pin ports, so I needed the 25-to-9 pin adapter on the right. |
 Futaba S-148 Servo. Your webcam will be mounted on top of the servo. |
 To stream live video directly from your computer, download the WebCam32 software. It allows you to show streaming video from a webpage by pointing the source URL directly at your own PC. You may have to open up the appropriate ports on your firewall. WebCam32 contains a Java applet which is automatically launched on the viewer’s browser. I recommend a Logitech WebCam. They’re around $100 or less. |
 Connect the serial port’s pin 2 (Received Data) to the Basic Stamp’s pin 10. The Parallax Basic program will be waiting on pin 10 for one of three signals: L (left), C (center), R (right). Connect serial pin 5 (Ground) to the Basic Stamp’s Vss (Ground). |
 The servo motor has three cables: Ground (black), Positive 5 Volts (red), Signal (white). Its signal line should be connected to the Basic Stamp’s pin 4. The Parallax Basic program will be sending signals to the servo on this pin. The servo motor’s Ground cable should be connected to the Basic Stamp’s Vss (Ground). Its Positive 5 Volts line should be connected to the Basic Stamp’s Vdd (Positive 5 Volts). The Basic Stamps provides enough juice to power the servo by itself. (Click for larger picture) |
Help us continue our work with a donation
 Forum {beta}Hatch ideas and help others with their ideas. |
40 queries. 0.449 seconds
April 26th, 2007 at 9:58
hi,
i want to know how i can make the c++ program and the vb program executable
April 15th, 2008 at 13:47
hi all , plz i want the c++ code for the webcam becouse i want to use it in a robotic project , so if you can help me with this , plz send the code to my E-mail: ( the_bad_killer@hotmail.com )
hope to c your rely
thx
zaid ghanem