GRYNX

10th 2005f October, 2005

Automated chicken feeder

by @ 20:57. Filed under Uncategorized

Construction and installation
A sunny Sunday is all it takes to go shop for the needed tools and install the system.



Drill a hole of the same size in the sidewall of the house exactly where the transport tunnel will come



The transport block is installed in the corner of the house using L-shaped mounting plates. It is needed to drill a hole in the hardwood first where the screws will come because getting a standard screw in is impossible.



The motor is be mounted against a large L-shape mounting plate that already had a slot of 10mm width where the shaft fits in. I had to add a small piece of wood because the part where the shaft came out was slight bigger then 10mm.



A small piece of tube and two clamps will firmly connect the spiral to the shaft of the motor.



Close-up on the motor:



This is the spiral connected to the motor:



The spiral is passed through the tunnel and the motor is mounted so there is enough space to let the clamps turn freely. Because we used plastic tube to connect them, it can buffer any variations in the movement.



At the sides of the transport block there is are two L-shaped mounting plates that were bend to a much bigger angle of about 165°. These will hold the side plate to create the food silo.



Inside the silo a triangle is installed to bring all the food to the transporter



This is the system filled with food:

17 Responses to “Automated chicken feeder”

  1. Aaron Says:

    I’m all for making things easy. You can use chickens as part of a permaculture system, where the chickens fertalize, weed, and till the ground all at the same time. Best of all, minimal work for you. Move their pen, and you can plant next year’s crops there.

    What could be better than letting them fend for themselves? Just check on their food every week or so, and get the eggs at your leisure.

  2. jazz Says:

    Well done mate.
    I have been thinking about making one of these for a while.
    I have experimented and failed thus far.
    The loose spiral wire is brilliant.

  3. PRESTON NYAUNDI Says:

    I would like to know more about the project eg. its layout please.

  4. stevo Says:

    tell me, why does this need a motor? why dont you just use gravity? what a waste of time… get a job you bum

  5. Tim Says:

    Cool idea. It’s a shame ’stevo’ is quick to stomp on your creativity.
    I’m sure ’stevo’ has a website article showing his ambition, effort,
    and dedication to turning his ideas into reality - yeah, right.

  6. Dan Says:

    Wow this is a really great project i’m hoping to make one myself!! The only things i’m slightly stuck
    on is when you say copier motor well what exactly do you mean and did you buy or make the spiral if so
    what name did it have! many thanks!
    p.s this site is great and i find it 1st pages on google lots!

  7. Maggie Rudy Says:

    This puts me in mind of a device I’d like to have for my chickens: an automatic coop door openercloser that would be triggered by light level. That awy I would be able to go away overnight knowing my hens would be shut up tight at night and let out at sunrise. Sadly I am mechanically deficient, so it remains a dream.

  8. Rob Says:

    Fantastic. I’ve made a chicken feeder where, when a chook steps onto a plate, a door opens giving the chook unlimited access to food. The closed door stops feral birds and mice from getting a free feed.
    My next project is an automatic door that lets them out at midday and closes on dusk. Any body got a design (circuit diagram for a timer and LDR input)? I guess Stevo can’t read or conceptualize a basic concept.

  9. Gary Clark Says:

    Rob, I like the sound of that chook feeder where they stand on a plate to open the door. I bought something similar recently but getting the chooks used to it has been dificult. Some still run off as soon as the door opens as it opens quite quickly and makes a noise too. Would be interested in seeing a picture of yours if possible. Maybe it’s better than the one I have. Keep up the good work,
    Gary. garyclark@slingshot.co.nz

  10. Wilfredo de Macedo Says:

    Hi Tom : I love your ideia,and using the it I´m thinking that could solve my problem to feed two aviaries gages with cocktaiels and finchs that I have, when I went out of my house on weekends and hollydays.I intend to make a smaller one of this feeders working like yours. What do you think ?
    Wilfredo

  11. Chris Says:

    i have never seen a chook choose grain over a lovely pile of kitchen scraps. i think this device is clever but not really needed.

  12. Mervyn Says:

    To stevo,
    I use gravity a feeder and it does not work because the chicks drag all the feed out in 10 minutes thinking there is something better in there.
    As for your rude comment all I can say is get a brain you bum.

  13. jeffey Says:

    good… actually we done related with this as our thesis project last 2006..also, automated chicken feeder only dry feeds…using VISUAL BASIC version 6 as our software in running program.. but it has quite difference, because our project has an automated lighting depends on the age of the chicks, automated water supply ad at the same time, automated cleaning manure under the bird cage using water sprinkler and wiper to wipe the manure/waste of the chicken..also has a sensor to sense wether the feederer is empty or not…thanks

  14. jeffey Says:

    IN ADDITION,, it depend on you as an owner what time u want to feed, light, drink and to clean the waste of your chicks..just to put the time into the program and it will automatically run all stated features aboved.. thanks 4 the same ideas we had..from philippines… STI COLLEGE uNIVERSITY

  15. chicken coop plans Says:

    I recently read a post where the author has made a chicken feeder with a PVC pipe and a cone, which works on the gravity flow. I think you should do a simple google search for such a feeder.

  16. osvikvi Says:

    Great I was looking for this, as I’m Leaving for hollidays, this will be a perfect project before getting off.

    -In reply to the gravity lovers, I understood that with this solution the chicks will eat the grain all day, wrather than just around feeding time in the morning.

    Thanks mate, good instructable…

  17. NHL Jerseys Says:

    Love is patient, NFL Jerseys love is kind. It does not envy, it does not boast, it is not proud. It is not rude, it is not self-seeking, it is not easily angered, it NHL Jerseys keeps no record of wrongs. Love does not delight in evil but rejoices with the truth. It always protects, always trusts, always MLB Jerseys hopes, always perseveres. where there are tongues, they will be stilled; where there is knowledge, it will pass away. When I was a child, I talked like a child, I thought like a child, I reasoned like a child.

Leave a Reply

Host your project

Write for Grynx:

Do you have what it takes? If you're the right person then email us.

Archives:

Support Grynx:

Help us continue our work with a donation

Website promotion SEO Managed Advertising

5 Most popular articles:

Google

Categories:

Do it yourself - DIY
Our projects collection

10 queries. 0.312 seconds

Home